Omnes Audio Emotion 2017 is a two way floorstanding speaker.
Omnes Audio Emotion 2017 is a transmission-line loudspeaker with drivers of Omnes Audio and Tang Band.
The kit is delivered with the following drivers:
- a Omnes Audio AMT 60 air motion transformer (ribbon-tweeter)
- a Tang Band W6-623 midrange / bass driver
The loudspeaker has been developed by Thorsten Fischer.
The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 3rd order low-pass filter (18 dB per octave slope) for the mids-woofer.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker with round AMT EUR 208,00 excl. VAT: € 174.79 / $ 202.76
Kit without cabinet, price per speaker with rectangulaire AMT EUR 208,00 excl. VAT: € 174.79 / $ 202.76
The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the fullrange driver are of type polypropylen (MKP) Clarity-Cap CSA and Audaphon.
Kit without cabinet with high-end-crossover, price per speaker with round AMT EUR 261,00 excl. VAT: € 219.33 / $ 254.42
Kit without cabinet with high-end-crossover, price per speaker with rectangulaire AMT EUR 261,00 excl. VAT: € 219.33 / $ 254.42
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit: EUR 5,10 excl. VAT: € 4.29 / $ 4.97
We recommend one board per kit (two boards for a speaker pair)