The Lia Mk2 is a high-end 2 way bassreflex loudspeaker with ribbon tweeter and Wavecor woofer. Lia MK2 has been developed by Dennis Frank and Daniel Gattig.
The crossover consists of a 3rd order high-pass filter (18 dB per octave slope) for the tweeter and a 2nd order low-pass filter for the woofer. A parallel RCL drain circuit is smoothing the frequency response of the woofer at about 1000 Hz
The frequency response of this speaker is very linear and has a high bandwidth. The decay spectrum is nearly perfect. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are lower than 0.5% above 500 Hz and rises not over 1.5% at 95 dB at 1 m .
Kit without cabinet, price per speaker
- not available
The high-end kit comes with two Rike S-Cap capacitors of high quality. The inductances are Mundorf copper foil coils or baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.
Kit with high-end-crossover without cabinet, price per speaker
- not available
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. I-2767, price per unit:
EUR 7,60 excl. VAT: € 6.39 / $ 7.34
We recommend one plate for one kit (for a pair of speakers you need 2 plates)